ConcoursMustang Forums
Restoring - General discussions that span across many different groups of years and models => Drivetrain => Topic started by: silverfox on July 05, 2013, 08:13:53 PM
-
Hi everyone.
I'm in the process of taking out a Hi-Po 289 out of my '66 GT350 clone and I could do with some assistance because the Hi-Po motor in the car appears to have a mix of Hi-Po non-correct and correct parts.
Help needed to verify the oil pan, oil cooler, fuel pump and fan.
Many thanks
Chris
Oil pan - Genuine cobra unit (I think it may be genuine?)
(http://i1154.photobucket.com/albums/p536/silverfox1001/P1010985_zps291a5fef.jpg) (http://s1154.photobucket.com/user/silverfox1001/media/P1010985_zps291a5fef.jpg.html)
(http://i1154.photobucket.com/albums/p536/silverfox1001/P1010988_zpsa0560283.jpg) (http://s1154.photobucket.com/user/silverfox1001/media/P1010988_zpsa0560283.jpg.html)
Oil Cooler
(http://i1154.photobucket.com/albums/p536/silverfox1001/GT350%20replica/engine/070613/P1010789_zps81bcab33.jpg) (http://s1154.photobucket.com/user/silverfox1001/media/GT350%20replica/engine/070613/P1010789_zps81bcab33.jpg.html)
(http://i1154.photobucket.com/albums/p536/silverfox1001/GT350%20replica/engine/070613/P1010766_zps4370a7d5.jpg) (http://s1154.photobucket.com/user/silverfox1001/media/GT350%20replica/engine/070613/P1010766_zps4370a7d5.jpg.html)
Fuel pump
(http://i1154.photobucket.com/albums/p536/silverfox1001/P1010769_zps562939b9.jpg) (http://s1154.photobucket.com/user/silverfox1001/media/P1010769_zps562939b9.jpg.html)
Fan
It seems that this is from a 429 engine ?? (see link below)
http://books.google.co.uk/books?id=MFrxUXmxQuwC&pg=PA46&lpg=PA46&dq=c9ze-d+fan&source=bl&ots=ycAGuH-jOc&sig=iUysFdQEgGIr3N8BfpFHiKeGzvQ&hl=en&sa=X&ei=mk_XUenzHaSM7Ab8tYHgDw&ved=0CGIQ6AEwBg#v=onepage&q=c9ze-d%20fan&f=false
(http://i1154.photobucket.com/albums/p536/silverfox1001/GT350%20replica/engine/P1010763_zpsa26cfd82.jpg) (http://s1154.photobucket.com/user/silverfox1001/media/GT350%20replica/engine/P1010763_zpsa26cfd82.jpg.html)
(http://i1154.photobucket.com/albums/p536/silverfox1001/GT350%20replica/engine/P1010762_zpsc0115b95.jpg) (http://s1154.photobucket.com/user/silverfox1001/media/GT350%20replica/engine/P1010762_zpsc0115b95.jpg.html)
-
I cant really help with specific parts, but bob mannels ford small block book would definately help you! its a bible for engine parts id.
-
Difficult to tell the COBRA oil pan over the internet - often comes down to weighing it and comparing that measurement to originals. Many repo have no additional markings
Oil filter holder is an after market unit
Fuel filter is an over the counter pump - might be a carter but does not have the normal markings but not original to a Hipo
-
I cant really help with specific parts, but bob mannels ford small block book would definately help you! its a bible for engine parts id.
Difficult to tell the COBRA oil pan over the internet - often comes down to weighing it and comparing that measurement to originals. Many repo have no additional markings
Oil filter holder is an after market unit
Fuel filter is an over the counter pump - might be a carter but does not have the normal markings but not original to a Hipo
Thanks for taking the time to look and post guys.
Jeff, on the oil pan, it will be coming off in the next week or so, anything in particular I should look for ?
Chris
-
Thanks for taking the time to look and post guys.
Jeff, on the oil pan, it will be coming off in the next week or so, anything in particular I should look for ?
Chris
A little reading here might answer some of your questions
http://saacforum.com/index.php?topic=13054.15 (http://saacforum.com/index.php?topic=13054.15)
-
A little reading here might answer some of your questions
http://saacforum.com/index.php?topic=13054.15 (http://saacforum.com/index.php?topic=13054.15)
Jeff,
Thanks, that's very, very helpful.
regards
Chris