ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1970 Mustang => Topic started by: jatkinson on December 23, 2013, 07:13:54 PM
-
Looking for pictures/shop manual pages showing the top end of a 351 V4 C . When I bought my car it had a Holley and an aluminum intake. I bought a carb and stock intake but am missing vacuum hoses, fuel lines etc. Anything that would help would be much appreciated. Thanks
-
Believe the routing for the hoses is in the library section - will have to look for a picture or two after the holidays ;)
-
OK Jeff Thanks for your help
-
Sorry for the holiday delay. Did look through my pictures and just about all the air cleaners are in the way :(
Have one with some details but the owner swapped out the carb for a Carter and the fuel system is all home made.
If you don't have the heater hose tubes (run across the passenger side of the intake) though IMHO will likely be a challenge to find in good condition
Tried :(
-
Its mainly the fuel and choke set up I need. Intake, carb, spacer, that sort of thing.