ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Mustang => Topic started by: 67gta289 on January 28, 2014, 09:19:17 PM
-
Grabbed these from an Ebay posting for 7F03S134867.
1. Finally a picture of the elusive AM/8 Track stereo door speaker cut outs.
2. 390 C6 with tach = 6,000 RPM (at least on this car...it is 1967 after all...)
Other than the black two tone paint on the hood (68 option) it looks very original.
-
Guess a PO drilled a couple of extra holes in the air clearer to get more flow??? Only to have someone else later in the cars life put rubber plugs in them. Can understand - we've always looked at that air cleaner and wondered how the engine got enough air at full throttle through that small necked snorkel.
But it worked ;)
-
This one confirms what I thought, that the speaker holes were not stamped but cut as needed. Note the small holes drilled for the corners and then cut between.
-
The speaker holes match the original door cut outs on my April 68 Dearborn car. It looks like a small hole saw in the four corners and straight cuts between them.
Danny