ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1970 Mustang => Topic started by: fastfret7 on March 27, 2014, 03:59:16 AM
-
Hello everyone and thank you for any help thrown my way!
Anyways, I was looking for a stock photo of an original 1970 302 2v engine bay so I can get get everything looking correct. Does anyone got one or has a link I can see one? 8)
-
Might as well get use to it ;)
What plant are you looking for and it might help narrow down (for some details) even what month?
Air conditioning?
Not to guarantee that we'll have one - but if we do would rather post pictures that you can rather than ones that we'll have to post allot of "don't copy this or that" notes ;)
Welcome to the site. :)
PS - just so you know why we do things (since your new) The post will be moved to the 69-70 area since it deals specifically with one year rather than multiple years across categories (65-66, 67-68 69-70.....) If it did it would be left in the Drivetrain section. Makes it easier for others looking for specific details in the future ;)
-
If its a Dearborn car - did you find the following set of pictures when you did your search ?
http://www.concoursmustang.com/forum/index.php?topic=5366.msg30133#msg30133 (http://www.concoursmustang.com/forum/index.php?topic=5366.msg30133#msg30133)
-
Oops sorry. I thought I should post in the engine section.
I have a 1970 302 2v "Grabber" edition fastback without a/c that was built in San Jose,Ca 02/24/70. I hope that narrows it down. Thanks everyone!!!
-
Thanks - took a look at my collection not allot to offer at this point.
These will offer a few details like some location & orientation of decals along with some other details. Any specific questions we might be able to help with.
Plenty of grease, grime and replaced parts :(
(http://i44.photobucket.com/albums/f49/firetrainer/70%20Mustang/70%20SJ/0R01F124589eng_zpsb49f5989.jpg) (http://s44.photobucket.com/user/firetrainer/media/70%20Mustang/70%20SJ/0R01F124589eng_zpsb49f5989.jpg.html)
(http://i44.photobucket.com/albums/f49/firetrainer/70%20Mustang/70%20SJ/0R01F116735eng_zps0c107dcf.jpg) (http://s44.photobucket.com/user/firetrainer/media/70%20Mustang/70%20SJ/0R01F116735eng_zps0c107dcf.jpg.html)
(http://i44.photobucket.com/albums/f49/firetrainer/70%20Mustang/70%20SJ/0R01F116735ValveOK_zps9fac84c5.jpg) (http://s44.photobucket.com/user/firetrainer/media/70%20Mustang/70%20SJ/0R01F116735ValveOK_zps9fac84c5.jpg.html)
-
Thanks - took a look at my collection not allot to offer at this point.
These will offer a few details like some location & orientation of decals along with some other details. Any specific questions we might be able to help with.
Plenty of grease, grime and replaced parts :(
(http://i44.photobucket.com/albums/f49/firetrainer/70%20Mustang/70%20SJ/0R01F124589eng_zpsb49f5989.jpg) (http://s44.photobucket.com/user/firetrainer/media/70%20Mustang/70%20SJ/0R01F124589eng_zpsb49f5989.jpg.html)
(http://i44.photobucket.com/albums/f49/firetrainer/70%20Mustang/70%20SJ/0R01F116735eng_zps0c107dcf.jpg) (http://s44.photobucket.com/user/firetrainer/media/70%20Mustang/70%20SJ/0R01F116735eng_zps0c107dcf.jpg.html)
(http://i44.photobucket.com/albums/f49/firetrainer/70%20Mustang/70%20SJ/0R01F116735ValveOK_zps9fac84c5.jpg) (http://s44.photobucket.com/user/firetrainer/media/70%20Mustang/70%20SJ/0R01F116735ValveOK_zps9fac84c5.jpg.html)
A million thank you's for those pictures. Where do u get that "ok" stamp from?? Is the sticker on the driver side shock tower the ford service or emissions sticker? Thanks!
-
A million thank you's for those pictures. Where do u get that "ok" stamp from??
I get it from my boxes of approximately 200 plus stamps that I've made up over the years. There are about 6 different (or more) versions so I typically cut the stamp out of a valve cover than make a stamp from it. Appears that the OK stamp is also different from engine plant to engine plant - though they are similar - so for example one designed for a 428 CJ would not be exactly the same as a small block
Is the sticker on the driver side shock tower the ford service or emissions sticker? Thanks!
That is the service decal - emission/timing decal is on the valve cover
-
Oh, here is where I am right now with the restoring of the engine bay(http://[URL=http://s316.photobucket.com/user/fastfret7/media/LAWS%20OF%20AVERAGE/1970%20Grabber%20Edition%20Mustang/1D9F9115-C8E5-4FBB-A6DC-8DEC4C100470_zpsoxul3ts5.jpg.html][IMG]http://i316.photobucket.com/albums/mm336/fastfret7/LAWS%20OF%20AVERAGE/1970%20Grabber%20Edition%20Mustang/1D9F9115-C8E5-4FBB-A6DC-8DEC4C100470_zpsoxul3ts5.jpg)[/URL][/img]
-
Any advice towards getting her correct would be great! What sticker is on top of the air cleaner arm?
-
Oh, here is where I am right now with the restoring of the engine bay ......................
Any advice towards getting her correct would be great! What sticker is on top of the air cleaner arm?
Sticker is an emission sticker related to the vapor return system installed on Calif delivered cars
Remove the FRONT sticker and the CAUTION FAN. Both are not original and likely came with some kit you purchased. Normally people throw half of those decals away. Looks like the air cleaner replacement decal (on on the drivers side) is the reproduction that does not include the part number for the filter. The original would ahve had that detail
PS mount and pump are finished in the wrong colors
Bypass hose is kinked - must have used a section of hoe rather than buying a preformed hose. That and the clamps were originally painted with the engine
Therm housing is missing the ported vacuum switch that would have controlled the vacuum going to your distributor
Heater hoses would have been black with AUTOLITE printing on them - available in reproduction form. Clamps fro the bypass and heater hoses would be the tower style
Allot of the engine compartment nuts and bolts have been painted over with black paint. Shock mount, shock upper bolts, spring covers, shock tower support, hood hinge and others Hood hinges and springs would have been phosphate and oil.
Fuel line would not be painted
Radiator, cap and overflow hose are all replacement non factory looking - no retaining clamp would have been used like the one in your picture
You have some non- factory wiring going on
No paint should be on the distributor and the retaining bracket and bolt would not be painted either
Looks like the vapor return line still needs to be attached to the charcoal canister
Fuel pump, gasket and mounting brackets would not be painted - but bare
Positive battery cable would not have been so thick and long
Spark plug with would have been dated AUTOLITE marked with different style boots than what you have
Missing some engine loom retaining clips that would be attached to the drivers side valve cover
That should get you started
-
Wow... I got some work to do. The engine is still being put back together. Oh, I have all the "Yellow" lined hoses and will try to address the other stuff you threw out there. Thank you so much for taking the time!!! 8)
So, where do I find the original looking stickers?
-
Wow... I got some work to do. The engine is still being put back together. Oh, I have all the "Yellow" lined hoses and will try to address the other stuff you threw out there. Thank you so much for taking the time!!! 8)
So, where do I find the original looking stickers?
ECS decals are the best currently available. Places like Virgina Mustang or NPD carry them or you can go to the source
http://ecsautomotive.com/products.php?co=f (http://ecsautomotive.com/products.php?co=f)
-
Here...this should help...A LOT.
This is actually an old photo...need to take a current one (heater hose clamps have been updated so the all reflect tower-type clamps...also lower radiator hose has been installed as well as original distributor cap). Only thing that needs to be done is install the correct belts (which I have) and that is it).
Jason
-
Here...this should help...A LOT.
This is actually an old photo...need to take a current one (heater hose clamps have been updated so the all reflect tower-type clamps...also lower radiator hose has been installed as well as original distributor cap). Only thing that needs to be done is install the correct belts (which I have) and that is it).
Jason
Could almost be a copy of fastfret7's car. Same/similar color, blacked out hinges, FRONT decal ....... :)
Need to find a paper covered vapor return (air cleaner to charcoal canister) hose. Those are pretty hard to find. Check other Ford brands - know others found some NOS Bronco ones that could be cut in half to make a couple for two Mustangs
-
Here...this should help...A LOT.
This is actually an old photo...need to take a current one (heater hose clamps have been updated so the all reflect tower-type clamps...also lower radiator hose has been installed as well as original distributor cap). Only thing that needs to be done is install the correct belts (which I have) and that is it).
Jason
Great photo... What year is that engine? Isn't ur engine suppose to be a darker shade of blue if it is a 1970? Everyone kept telling me to paint it dark DuPont 1606 "corporate blue"
-
Could almost be a copy of fastfret7's car. Same/similar color, blacked out hinges, FRONT decal ....... :)
Need to find a paper covered vapor return (air cleaner to charcoal canister) hose. Those are pretty hard to find. Check other Ford brands - know others found some NOS Bronco ones that could be cut in half to make a couple for two Mustangs
Was not aware of the paper tube for the charcoal canister. I just used what I though originally came on the car when my mom bought it used in 1971. Also, if you look closely, the intake manifold is painted the darker corporate blue. This was on purpose because before I repainted the engine, I made sure I matched the colors to what was originally on there. Used Duplicolor as the company for the painting. Also, I will upload some more recent photos and in there, I have taken off the "Front" sticker since I now understand that it was incorrect to have it on there in the first place (at least I think so...car rolled off the line December 31, 1969...five days ahead of schedule).
Any suggestion on what I can further do to make my engine correct will be helpful. Also, I noticed I have a 4-balde cooling fan on my car. However, when I have looked at NPD, I noticed that they said the 4-blade was only for 200CID and some 289 engines and that the 6-blades were for 302 engines (non clutch fan) are they correct and should I change it out or leave it alone (though I must admit, switching to the 6-blade for extra cooling would be nice...but stock first...mods second)?
Also, anyone know where I can find the OK stamp...need to put that on the valve cover.
-
It's interesting because I asked like 12 forum people(other website) about the correct color to paint the whole engine and they told me the engine block, power steering, manifold, heads, and valve covers should be dark blue for a 1970 302... So confused. Just wish I could get a straight answer. Now, my stickers are remake crap.. Darn it!
-
It's interesting because I asked like 12 forum people(other website) about the correct color to paint the whole engine and they told me the engine block, power steering, manifold, heads, and valve covers should be dark blue for a 1970 302... So confused. Just wish I could get a straight answer. Now, my stickers are remake crap.. Darn it!
You are not the only one...LOL...it all depends on where your mustang was built, when it was built, and other factors. For my mustang, I just matched the paint that was already on the engine before I re-painted it. So I am fairly certain for my mustang, I am correct. As for yours, I don't know...I can say this...as long as it is some sort of Ford Blue, I am sure you ok.
-
Was not aware of the paper tube for the charcoal canister. I just used what I though originally came on the car when my mom bought it used in 1971. Also, if you look closely, the intake manifold is painted the darker corporate blue.
The whole engine would have been painted the same color - all painted at the same time by the same painter
This was on purpose because before I repainted the engine, I made sure I matched the colors to what was originally on there. Used Duplicolor as the company for the painting. Also, I will upload some more recent photos and in there, I have taken off the "Front" sticker since I now understand that it was incorrect to have it on there in the first place (at least I think so...car rolled off the line December 31, 1969...five days ahead of schedule).
No FRONT decals were used on 70 Mustangs on the air cleaners
Any suggestion on what I can further do to make my engine correct will be helpful. Also, I noticed I have a 4-balde cooling fan on my car. However, when I have looked at NPD, I noticed that they said the 4-blade was only for 200CID and some 289 engines and that the 6-blades were for 302 engines (non clutch fan) are they correct and should I change it out or leave it alone (though I must admit, switching to the 6-blade for extra cooling would be nice...but stock first...mods second)?
Will have to look (through the [parts books) to see. One handy stops (print date) in 68
Also, anyone know where I can find the OK stamp...need to put that on the valve cover.
IMHO you need to deal with all the other details before you worry about and ink stamp. No one is reproducing the stamp for your car unlike the ones flating around for the Boss 302 and the 428 CJ
-
It's interesting because I asked like 12 forum people(other website) about the correct color to paint the whole engine and they told me the engine block, power steering, manifold, heads, and valve covers should be dark blue for a 1970 302... So confused.....
Can only guess which "other" web site that was ::)
All depends on who is answering and what they offer to support their suggestions along with their experiences. Knowing allot of people here I would think we have combined judging and restoring experience totaling almost 500 years or so. Buy that makes some of us feel really old :)
-
The whole engine would have been painted the same color - all painted at the same time by the same painter
No FRONT decals were used on 70 Mustangs on the air cleaners
Will have to look (through the [parts books) to see. One handy stops (print date) in 68
IMHO you need to deal with all the other details before you worry about and ink stamp. No one is reproducing the stamp for your car unlike the ones flating around for the Boss 302 and the 428 CJ
What other details are those? Will spray the intake manifold the ford blue that the rest of the car has this weekend. Found a template that can be used to make the stamp...will get around to that eventually.
-
What other details are those? Will spray the intake manifold the ford blue that the rest of the car has this weekend. Found a template that can be used to make the stamp...will get around to that eventually.
Trying to be helpful - not picking on you :)
- Fender attachment bolts
- Shock bolts
- Finish of inner fender /shock cover bolts
- Hood hinges, springs and mounting bolts
- Negative battery cable - not sure if its the wrong one (with the extra ground) but the clamp would not be there at all
- Repair work - taping on convertible top wiring
- Shock color (and style) firewall support braces - hardware
- Ported vacuum switch - not factory and its completely painted
- Paint condition of the intake
- Condition of the alternator
- Distributor hold down and hardware condition and finish
- Radiator cap
- CAUTION FAN decal is not original
- Aftermarket wire wrap on the engine wire loom
- Lack of j hooks to hole the engine wire loom to engine along the drivers side valve cover
- PS pump color & COndition of dip stick - rust
- Zip ties on the drivers side wire loom
- Washer bottle hardware finish
- Radiator overflow hose has been painted
- Condition of battery hold down clamp and missing hardware
- Paint on the wire looms
- Condition of the heater hose tube and coil bracket
- Wiper motor wire loom is not anchored to the firewall/cowl pinch weld. Wiper motor ground wire painted over, along with the grounding screw and rubber plug in the center of cowl
- Master cylinder and cap finish and condition
- Not sure what the wire is that is going into the distributor at the front edge - where it looks to be taped over ????? Or the aluminum boss from the base on the drivers side. Given the vacuum advance it looks like a later unit from something else. Have you ever looked at the markings on this??
- Condition of the fuel line and the heater hose attachment point - both are rusty
- Wrong valve cover gaskets
- Dip stick unpainted
- Battery tag on retaining bolt
- Painted edge (black ) along the fenders - looks like the fende3rs were tapped off then the engine compartment was painted - unlike originally
- Painted radiator shroud
That's a start
Don't know what factory (sorry if you did - I seem to not be able to find that detail) the car was built at. Depending on that detail there are possibly another 6 or so things I would have mentioned
Consider that the lack of a paint mark or inspector mark will not lose you any point in most restored class but any of the above mentioned things will. My reason to suggest focusing on where you'll lose points ;)
-
Trying to be helpful - not picking on you :)
- Fender attachment bolts
- Shock bolts
- Finish of inner fender /shock cover bolts
- Hood hinges, springs and mounting bolts
- Negative battery cable - not sure if its the wrong one (with the extra ground) but the clamp would not be there at all
- Repair work - taping on convertible top wiring
- Shock color (and style) firewall support braces - hardware
- Ported vacuum switch - not factory and its completely painted
- Paint condition of the intake
- Condition of the alternator
- Distributor hold down and hardware condition and finish
- Radiator cap
- CAUTION FAN decal is not original
- Aftermarket wire wrap on the engine wire loom
- Lack of j hooks to hole the engine wire loom to engine along the drivers side valve cover
- PS pump color & COndition of dip stick - rust
- Zip ties on the drivers side wire loom
- Washer bottle hardware finish
- Radiator overflow hose has been painted
- Condition of battery hold down clamp and missing hardware
- Paint on the wire looms
- Condition of the heater hose tube and coil bracket
- Wiper motor wire loom is not anchored to the firewall/cowl pinch weld. Wiper motor ground wire painted over, along with the grounding screw and rubber plug in the center of cowl
- Master cylinder and cap finish and condition
- Not sure what the wire is that is going into the distributor at the front edge - where it looks to be taped over ????? Or the aluminum boss from the base on the drivers side. Given the vacuum advance it looks like a later unit from something else. Have you ever looked at the markings on this??
- Condition of the fuel line and the heater hose attachment point - both are rusty
- Wrong valve cover gaskets
- Dip stick unpainted
- Battery tag on retaining bolt
- Painted edge (black ) along the fenders - looks like the fende3rs were tapped off then the engine compartment was painted - unlike originally
- Painted radiator shroud
That's a start
Don't know what factory (sorry if you did - I seem to not be able to find that detail) the car was built at. Depending on that detail there are possibly another 6 or so things I would have mentioned
Consider that the lack of a paint mark or inspector mark will not lose you any point in most restored class but any of the above mentioned things will. My reason to suggest focusing on where you'll lose points ;)
Not picking on me...more like being thrown to the wolves (meant in jest)...lol...like I said, the pic on the forum is not updated...however I do need to point out one thing...the radiator cap is the correct MOTORCRAFT cap..and yes I am aware of the vacuum advanced diaphragm is wrong...unfortunately, the original distributor went out about 2 years back and my mechanic put in this one. I know this car is nowhere near concours worthy (hence never entering it in judging contests or nationals)...but, I just was curious...as for some of the paint that is mentioned (i.e. inner fenders)...that is the original paint, the reason why it looks like it was "taped off" was when the car was re-painted in 2009, they taped the fenders off to prevent over-spary.
Also, if one considers that the engine went from the photo below to what it is now...I say I have not done that bad of a job (at least that is what I thought until all of the above was pointed out).
-
Not picking on me...more like being thrown to the wolves (meant in jest)...lol...
Nope - not at all. You asked and I simply answered ;)
like I said, the pic on the forum is not updated...however I do need to point out one thing...the radiator cap is the correct MOTORCRAFT cap.
Motorcraft is not correct - for 70 it would be AUTOLITE and shaped differently. MOTORCRAFT parts on the line were introduced during 1972 production (my understanding - as listed in MCA rules)
You've done allot - and have a bit more to do - if your interested in having as original
-
Nope - not at all. You asked and I simply answered ;)
Motorcraft is not correct - for 70 it would be AUTOLITE and shaped differently. MOTORCRAFT parts on the line were introduced during 1972 production (my understanding - as listed in MCA rules)
You've done allot - and have a bit more to do - if your interested in having as original
Well...thanks. I must admit, there is no way I will be able to get it back to original condition (already did to many mods to other parts of the car (i.e. paint job and interior...now a new top). So the big question is...are there any MAJOR flaws with how the motor looks (i.e. something that is obviously out of place that even a novice would notice)?
Most likely will get an autolite cap this weekend.
Jason
-
.........So the big question is...are there any MAJOR flaws with how the motor looks (i.e. something that is obviously out of place that even a novice would notice)?
Major flaws is such a strong term I think for what we're discussing which is simply making it more like it was originally
For novices I would say that the condition and finishes is something that anyone at a show will take notice of and the one that takes the most time but in general cost the least - out of pocket.
After that the fender bolts would be obvious as would the distributor and PS pump color. For any one that has looked at any of the major forums the CAUTION FAN decal would stand out since that one has been mentioned in hundreds of post across the internet
-
Major flaws is such a strong term I think for what we're discussing which is simply making it more like it was originally
For novices I would say that the condition and finishes is something that anyone at a show will take notice of and the one that takes the most time but in general cost the least - out of pocket.
After that the fender bolts would be obvious as would the distributor and PS pump color. For any one that has looked at any of the major forums the CAUTION FAN decal would stand out since that one has been mentioned in hundreds of post across the internet
I will upload a current photo of the engine bay sometime this weekend. The fender bolts have been changed back to the originals (unfortunately they have been painted over) and the distributor cap has already been replaced (if you are talking about the vacuum advanced...that is a horse of a different color)...I will take off the caution fan decal and will also order the correct radiator cap, distributor cap, and oil filter. But no more after that...I guess after all the suggestions that were made, I have come to realize that my car is more of a redo-mod than it is a concours car.
-
Every little bit helps as long as it fits with your goal and your planned usage.
Noticed the thumbnail of your car. Always like the 70 convertibles - had a special order paint deluxe interior one (for the wife) before we sold it to buy the Shelby for her. Local shop (Resto Mod shop) currently has three 70 convertibles in for full restoration - you don't often see a single one so three in one shop is allot. Also looked as an original owner 428 CJ one also recently
Good luck with the car
-
Every little bit helps as long as it fits with your goal and your planned usage.
Noticed the thumbnail of your car. Always like the 70 convertibles - had a special order paint deluxe interior one (for the wife) before we sold it to buy the Shelby for her. Local shop (Resto Mod shop) currently has three 70 convertibles in for full restoration - you don't often see a single one so three in one shop is allot. Also looked as an original owner 428 CJ one also recently
Good luck with the car
Thanks...
Have started process of addressing some problems mentioned above...will give status update soon. However while completely unrelated to this topic, I have received a set of NOS tail light bezels (still in the original ford box) and have installed them on my car.
-
New photo (finally. Thrash away (meaning let me know what else has to be done) ladies and gentlemen. I have decided to leave the Caution Fan decal on only because I like it. Like I have said (or at least I think I have said), there is no way my car will ever be concours, but I wan't to at least give the appearance of a stock motor.
A couple of things have happened since the photo was taken:
1. All the rust throughout the engine bay has been removed (especially on the heater hose ports)...have not been able to get to the alternator fan yet (need to remove the alternator to do this...might paint the fan and the pulley IF they were originally painted and if so...what color...if not, can I get away with clear coating these parts to prevent rust).
2. Battery hold-down clam was re-painted balck and rust removed
3. Batter hold down clamps rust was removed...
4. battery hold down nuts are now correct type (locking washer thingys...lol...I don't know the name)
5. All exposed wires were covered with original wire wrapping tape (thank you national parts depot)
6. All non-stock wire loom wrapping has been removed.
More suggestions are appreciated.
Oh...one upcoming upgrade...correct emissions decal will be put on snorkel.
Cheers
-
More suggestions are appreciated.
You've been busy :)
1- Remove the Caution fan if you want it to be original - leave it if your worried that you will forget and stick you hand in the fan
2- Replace the fender sealant with black 3M strip chalking
3- Shocks would have been semi-gloss black and the retaining bolts would not have been red (at least that is what they look like in the picture ;)
4- Remove the sticker from the side of the battery
5- Dip stick handle (loop and cover) would have been Ford corporate blue color.
6. Valve cover breather would ahve been semi-gloss black
Not sure (sorry if I missed it) if we discussed when and where your car was built. Likely some additional items depending on that information
-
You've been busy :)
1- Remove the Caution fan if you want it to be original - leave it if your worried that you will forget and stick you hand in the fan
2- Replace the fender sealant with black 3M strip chalking
3- Shocks would have been semi-gloss black and the retaining bolts would not have been red (at least that is what they look like in the picture ;)
4- Remove the sticker from the side of the battery
5- Dip stick handle (loop and cover) would have been Ford corporate blue color.
6. Valve cover breather would ahve been semi-gloss black
Not sure (sorry if I missed it) if we discussed when and where your car was built. Likely some additional items depending on that information
Fender sealant? What is that?
Shocks are being replaced with KYB gas-adjust shocks (black all around)...still have the original rear shocks on the car and boy does it ride ragged...time for an upgrade. Retaining bolts will eventually be stripped of the red paint.
One of the largest problems with this car is that the fender bolts that I had on there were not correct and after a small accident, were painted over and now I am deathly afraid to remove them (don't want to screw up the finish).
Will paint the oil breather cap and oil dip-sick this weekend. Also forgot to mention that i re-painted the intake manifold to match the rest of the engine.
AND FYI...car was built in Dearborn, MI. Attached is the deluxe Marti report to give you more information
-
Fender sealant? What is that?
Sorry in the picture without enlarging it it looked like the sealant (black chalking that went between the fenders and inner fenders) was light gray. A common mistake. Enlarging the picture I can see that there does not seem to be any sealant and its just the gap between where you painted and the fender - the old dirty surface is showing
(http://www.concoursmustang.com/forum/gallery/2/6-300414213039.jpeg)
-
Sorry in the picture without enlarging it it looked like the sealant (black chalking that went between the fenders and inner fenders) was light gray. A common mistake. Enlarging the picture I can see that there does not seem to be any sealant and its just the gap between where you painted and the fender - the old dirty surface is showing
(http://www.concoursmustang.com/forum/gallery/2/6-300414213039.jpeg)
Ok...so what sealant do you recommend that I get and how do you recommend that I go about applying it so I don't screw it up? I have always wondered if I could close the gap between the fender and the engine bay for a better look (but I have been afraid to). Now that I know that sealant is used...I want to get it correct.
Thanks for all your help.
-
From reply #30
.............
2- Replace the fender sealant with black 3M strip chalking ......................
-
And a third round of everyone's favorite game..."Whats wrong with my engine".
Now this was taken today at the Culver City Car Show (hence why all the hoses and other miscellaneous items seem to be polished).
Have at it.
One note...have not had the chance to get the 3m Cauliking cord yet...will do it soon. Also, I am very aware of the fender bolts, however, I do not want to risk running the paint job on the fender itself, so unfortunately, they have to stay.