ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1968 Mustang => Topic started by: Oz390 on October 04, 2014, 09:15:38 PM

Title: 68 390/C6 vacuum line routing
Post by: Oz390 on October 04, 2014, 09:15:38 PM

Anyone have a photo of the hard line routing from the modulator to the bell flange? 

I have two lines, different bends, and some clips that don't seem to line up.

Alternatively, I'd guess a 67 or 69 would be similar..... web search came up with various routings, looking for correct...

Title: Re: 68 390/C6 vacuum line routing
Post by: J_Speegle on October 05, 2014, 06:40:41 PM

Guess you didn't get any/many responses elsewhere ;)

Hard to get pictures since most are in cars .. and ones out of cars often have the vacuum lines off for some reasons.

Looking at my pictures I can offer the following - identified as a 68 C6 application. Hope this helps

(http://www.concoursmustang.com/forum/gallery/2/6-051014164008.jpeg)

(http://www.concoursmustang.com/forum/gallery/2/6-051014164019.jpeg)

Title: Re: 68 390/C6 vacuum line routing
Post by: Oz390 on October 06, 2014, 06:30:57 PM

Nope, as not many were made (on Mustangs at least) not a lot of comps around.

Thanks very much for the photos.  Confirms what I thought, the two I have an old one from "somewhere", and a new repro, don't fit the application.  At least I have the right clips!  :)

Title: Re: 68 390/C6 vacuum line routing
Post by: TLea on October 06, 2014, 06:39:20 PM

 Current reproduction from various suppliers are not even close. I make up my own