Author Topic: Clutch Pedal Bumper / Stopper?  (Read 2003 times)

Offline Mike_B_SVT

  • Sr. Member
  • ****
  • Posts: 388
Clutch Pedal Bumper / Stopper?
« on: February 20, 2018, 07:27:01 PM »
My '70 (Dearborn, Oct 6th, 1969) has lost its clutch pedal bumper / stopper.  What was "original" / would be a correct replacement?

It appears that there are two versions available:

- a pink version that seems to be for 1969, with a short "neck".
https://www.ebay.com/itm/1969-FORD-MUSTANG-MANUAL-TRANS-CLUTCH-PEDAL-BUMPER-STOP/142595536810

- a black version that seems to be for 1970, with a long "neck".
https://www.ebay.com/itm/Mustang-Clutch-Pedal-Bumper-1969-1970-Daniel-Carpenter/181571016807

Here is what's left of mine - it appears to have been a pink version of the "long neck" '70 bumper.  It looks like it had a longer shaft like the black '70 stopper, but is made of pink rubber like the '69 version.

Mike B.

2003 Mustang Cobra Convertible
1 of 354 in Sonic Blue

1970 Cougar Eliminator (Competition Gold / Black Decor Interior), 428SCJ, Ram-Air, 4-speed w/ Hurst shifter
Built: Dearborn, Oct 6th, 1969
Cat Bites Man!

Offline krelboyne

  • Hero Member
  • *****
  • Posts: 1221
    • West Coast Classic Cougars
Re: Clutch Pedal Bumper / Stopper?
« Reply #1 on: February 20, 2018, 09:57:43 PM »
The 1969 rubber bumper attaches to the pedal hanging bracket. The common 1970 bumper like yours attaches to the clutch pedal.
I found one remaining on a 1970 clutch pedal.
Scott Behncke - Carcheaologist
West Coast Classic Cougars
503-463-1130
1968 GT/CS 302-4V San Jose 05B
1968 Cougar XR7 Dearborn 09A

Offline Mike_B_SVT

  • Sr. Member
  • ****
  • Posts: 388
Re: Clutch Pedal Bumper / Stopper?
« Reply #2 on: February 21, 2018, 05:06:01 PM »
Thanks Scott!

So no one else has seen a pink bumper on a '70 clutch pedal?
Mike B.

2003 Mustang Cobra Convertible
1 of 354 in Sonic Blue

1970 Cougar Eliminator (Competition Gold / Black Decor Interior), 428SCJ, Ram-Air, 4-speed w/ Hurst shifter
Built: Dearborn, Oct 6th, 1969
Cat Bites Man!

Offline Vcode

  • Full Member
  • ***
  • Posts: 134
Re: Clutch Pedal Bumper / Stopper?
« Reply #3 on: February 21, 2018, 07:13:37 PM »
Thanks Scott!

So no one else has seen a pink bumper on a '70 clutch pedal?

The MPC calls out
1970
D0ZZ-7583-B  (200/250/302/351/428) #Red Rubber  (#Identification Marking)

There were two bumpers used in 1969
C8OZ-7583-A for 200/250/302 - Black
C8OZ-7583-B for 351/390/428/429 - Red

Offline Mike_B_SVT

  • Sr. Member
  • ****
  • Posts: 388
Re: Clutch Pedal Bumper / Stopper?
« Reply #4 on: February 27, 2018, 03:01:09 PM »
The MPC calls out
1970
D0ZZ-7583-B  (200/250/302/351/428) #Red Rubber  (#Identification Marking)

Thank you!  That's probably what I have then - or what's left of it.

Looks like the repro's and "NOS" currently available are all black.  I'll probably just go with a black repro for now and add a red one to my "Wish List".

I did find this pedal assembly on eBay that appears to show the red bumper still in place...

« Last Edit: February 27, 2018, 03:12:20 PM by Mike_B_SVT »
Mike B.

2003 Mustang Cobra Convertible
1 of 354 in Sonic Blue

1970 Cougar Eliminator (Competition Gold / Black Decor Interior), 428SCJ, Ram-Air, 4-speed w/ Hurst shifter
Built: Dearborn, Oct 6th, 1969
Cat Bites Man!

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9317
Re: Clutch Pedal Bumper / Stopper?
« Reply #5 on: February 27, 2018, 05:07:47 PM »
Thank you!  That's probably what I have then - or what's left of it.

Looks like the repro's and "NOS" currently available are all black.  I'll probably just go with a black repro for now and add a red one to my "Wish List".

I did find this pedal assembly on eBay that appears to show the red bumper still in place...


check NPD .I think some one said they had the red ones.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2173
    • Midlife Harness Restorations
Re: Clutch Pedal Bumper / Stopper?
« Reply #6 on: February 27, 2018, 07:31:28 PM »
NPD part 7583-4A, $14.95
Midlife Harness Restorations - http://midlifeharness.com

Offline Mike_B_SVT

  • Sr. Member
  • ****
  • Posts: 388
Re: Clutch Pedal Bumper / Stopper?
« Reply #7 on: March 03, 2018, 01:46:29 AM »
Mike B.

2003 Mustang Cobra Convertible
1 of 354 in Sonic Blue

1970 Cougar Eliminator (Competition Gold / Black Decor Interior), 428SCJ, Ram-Air, 4-speed w/ Hurst shifter
Built: Dearborn, Oct 6th, 1969
Cat Bites Man!

Offline Mike_B_SVT

  • Sr. Member
  • ****
  • Posts: 388
Re: Clutch Pedal Bumper / Stopper?
« Reply #8 on: June 05, 2018, 04:35:24 PM »
Some update on this subject;

So I purchased the black bumper to give it a shot.  It was pretty sloppy in the hole, and I didn't really think it should be that loose, so I ordered a red bumper as well.  The stem was a bit short and the rubber seemed very soft - so much so that the little "tabs" on the stem would not hold it firmly in place.  But with the clutch pedal up, it was held there just fine ;-) 

Was reconnecting the brake booster a week or so later and took a look at the red clutch bumper.  Hmm... I think I have a match, LOL!

Some pics:
Comparison pic of both bumper versions, as well as the remains of my original.
Original red bumper remains when they were still in place (2pics)
New bumper after a week or so installed.

Mike B.

2003 Mustang Cobra Convertible
1 of 354 in Sonic Blue

1970 Cougar Eliminator (Competition Gold / Black Decor Interior), 428SCJ, Ram-Air, 4-speed w/ Hurst shifter
Built: Dearborn, Oct 6th, 1969
Cat Bites Man!