Author Topic: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER  (Read 5795 times)

Offline guntrucker

  • Newbie
  • *
  • Posts: 19
COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« on: July 18, 2014, 05:50:54 PM »
CAN ANYONE TELL ME THE ORIGINAL MANUFACTURER OF THE COBRA CLOSED LETTER (SOLID LETTER) VALVE COVERS?  I KNOW BUDDY BAR MADE THE OPEN LETTER DESIGN BUT I READ SOMEWHERE THAT ANOTHER COMPANY MADE THE CLOSED LETTER DESIGN VALVE COVERS THAT WERE ALSO OFFERED OVER THE COUNTER. ANY HELP WOULD BE GREATLY APPRECIATED.

JAMES

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7684
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #1 on: July 18, 2014, 06:05:41 PM »
Offenhauser was the other one, IIRC.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline guntrucker

  • Newbie
  • *
  • Posts: 19
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #2 on: July 18, 2014, 08:30:03 PM »
Thanks but I'm not referring to the open letter valve covers, I'm talking about the closed letter valve covers.

James

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7684
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #3 on: July 19, 2014, 12:57:26 AM »
Thanks but I'm not referring to the open letter valve covers, I'm talking about the closed letter valve covers.

James

Right, that's what I was referring to.  Believe the marking is OECO on the bottom for Offenhauser.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline guntrucker

  • Newbie
  • *
  • Posts: 19
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #4 on: July 19, 2014, 05:50:12 PM »
I have several sets of 66-70 small block cobra closed letter valve covers and I can find no markings on any of them. I'll try to attach a picture of them if I can.

James

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #5 on: July 19, 2014, 06:51:18 PM »
I have several sets of 66-70 small block cobra closed letter valve covers and I can find no markings on any of them. I'll try to attach a picture of them if I can.

James

Are those redone or service replacements/NOS?
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline guntrucker

  • Newbie
  • *
  • Posts: 19
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #6 on: July 19, 2014, 10:31:20 PM »
They're NOS.  They have no manufacturer's mark inside. I'm trying to find the name of the original manufacturer but it was not Buddy Bar or Offenhauser. Here's a picture of the inside.

James

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9317
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #7 on: July 19, 2014, 11:08:37 PM »
I have several sets of 66-70 small block cobra closed letter valve covers and I can find no markings on any of them. I'll try to attach a picture of them if I can.

James
I don't remember seeing any ether.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9317
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #8 on: July 19, 2014, 11:59:01 PM »
 I had to review my notes. Ansen was and still is the MFG of these valve covers for Ford.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline guntrucker

  • Newbie
  • *
  • Posts: 19
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #9 on: July 20, 2014, 04:57:29 PM »
Thank you, yes, I do remember the name Ansen now. Thanks again.

James

Offline Brant

  • Sr. Member
  • ****
  • Posts: 497
    • Virginia Classic Mustang Inc
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #10 on: July 20, 2014, 06:27:34 PM »
The valve covers in the picture are a bit later NOS service part valve covers.  Note the slots at the PCV hole and larger PCV hole.  There have been several variations of these covers over the years.  The ones currently available are even different yet.  Scott Drake made a super reproduction years ago, but they are no longer available due to Ford licensing issues - i.e. they are available from Ford Racing, so Drake's cannot be licensed.

Offline guntrucker

  • Newbie
  • *
  • Posts: 19
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #11 on: July 20, 2014, 09:48:05 PM »
Sorry, I posted the wrong picture at the beginning of the thread. Those were the later valve covers. Here's the picture I meant to post the first time.

These are authentic Cobra closed letter valve covers.

James

Offline guntrucker

  • Newbie
  • *
  • Posts: 19
Re: COBRA CLOSED LETTER VALVE COVERS MANUFACTURER
« Reply #12 on: July 20, 2014, 09:51:47 PM »
I tried to post pictures of the fronts and backs but it only took the backs. Here's a picture of the fronts.

James