Recent Posts

21

1964 1/2 - 1965 / Re: Early 65 San Jose Fastback Trap Door Surround Panel Rivets or Screws?

« Last post by ChrisV289 on May 09, 2024, 10:38:23 PM »

Posted on Facebook for anyone who might have an unmolested interior SJ car built between august of 64 and December 64. The red car is actually 5R09K125001 when Jr shelby owned it (don?t know if that is his real name). First white car has a November 64 build date and the second white one is October 3, 1964. As I get more responses I?ll post.

22

Body, Paint & Sealers / Re: Interesting splash shield

« Last post by ruppstang on May 09, 2024, 09:20:13 PM »

It must be a very late service part. I never have seen pop rivets used.

23

Parts for Sale / 351W plug wires

« Last post by Big Al on May 09, 2024, 09:14:02 PM »

Marti repops  351W with orange boots, date code 2Qtr 70
slightly used  good cond -  no issues   $25
can deliver to MCA Ozark or Des Moines

Al

24

Body, Paint & Sealers / Interesting splash shield

« Last post by Coralsnake on May 09, 2024, 06:30:01 PM »

I dont think Ive seen rivets on one of these? Is this common?

https://www.ebay.com/itm/196323946660?_trkparms=amclksrc%3DITM%26aid%3D777008%26algo%3DPERSONAL.TOPIC%26ao%3D1%26asc%3D20240131095853%26meid%3D507d854c085d4ccb9985ad2c08d5c380%26pid%3D101949%26rk%3D1%26rkt%3D1%26itm%3D196323946660%26pmt%3D1%26noa%3D1%26pg%3D4375194%26algv%3DRecentlyViewedItemsV2Mobile%26brand%3DFord&_trksid=p4375194.c101949.m162918&_trkparms=parentrq%3A5f4204cc18f0ab4c9de4f5f1ffff8740%7Cpageci%3A1670c5c9-0e4b-11ef-9bcd-96ffd15522df%7Ciid%3A1%7Cvlpname%3Avlp_homepage

25

1967 Mustang / Re: 67 buck tag

« Last post by gtamustang on May 09, 2024, 05:17:50 PM »

SK is dual exhaust as only S- and K-codes received dual exhaust in 1967.

26

1966 Mustang / Re: Fastback Rear Folding Seat

« Last post by 66TotalPerf on May 09, 2024, 04:25:02 PM »

Another question. For my '66, any idea where to buy the two parts circled, 11736 and 111B82? I know 111B82 is the rubber stop mounted on the bottom side of the rear panel, however, I don't know what 11736 is.

27

1966 Mustang / Re: Fastback Rear Folding Seat

« Last post by 66TotalPerf on May 09, 2024, 04:15:00 PM »

No rush at all Jim. Thanks again!

28

1966 Mustang / Re: Fastback Rear Folding Seat

« Last post by jwc66k on May 09, 2024, 04:12:51 PM »

Now I understand. The lack of holes indicates that panel is probably a 65. I got several things this to do afternoon so it may take a couple of hours before I can measure my 66 GT Fastback.
Jim

29

Parts for Sale / 71/73 Hood

« Last post by Big Al on May 09, 2024, 04:04:56 PM »

OEM takeoff  - good condition, minor "warehouse scratches" .   center "feature line" NOT kinked.  Not NASA hood. No leading front edge trim.  No rust    $100
can deliver to MCA Ozark or Des Moines
Al

30

1966 Mustang / Re: Fastback Rear Folding Seat

« Last post by 66TotalPerf on May 09, 2024, 03:31:26 PM »

My panel, which I shared the photo of, has no mounting holes. My understanding is that for a '66+, the raised sections of both sides of this panel should have 3 in-line holes to mount to the car body.

I have all assembly manuals and confirmed the mounting steps. In the diagram attached, I don't have the holes in my panel to be able to install screws B, D, K.

I'm wondering if I can drill the missing holes and if anyone has the measurements to assist with this?

Thanks!