Author Topic: 67 Hard Fuel Line Connection  (Read 466 times)

Offline orgnl70

  • Jr. Member
  • **
  • Posts: 56
67 Hard Fuel Line Connection
« on: November 19, 2021, 09:28:30 PM »
67 S Code. Holly Model 4150 4V Carb.
The hard fuel line from the fuel pump to the carb. stops short about an inch from the carb. inlet.  The end of the fuel line is raised. It looks as though a rubber hose is to be used. The carb. has a female thread.
Any suggestions? A picture would be helpful.
Thanks in advance

Offline carlite65

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2379
Re: 67 Hard Fuel Line Connection
« Reply #1 on: November 19, 2021, 10:04:14 PM »
filter?
5F09C331248

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24317
Re: 67 Hard Fuel Line Connection
« Reply #2 on: November 20, 2021, 12:39:42 AM »
Any suggestions? A picture would be helpful.

Guess you missed or didn't check the Unrestored Picture Section of the site. Some forget that resource is there.

Check the S code fastback and picture posted as EC-2. Looks like aftermarket clamps but you will see the carb, and fuel line connection. With the filter
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9080
Re: 67 Hard Fuel Line Connection
« Reply #3 on: November 20, 2021, 12:40:01 AM »
filter?
Correct. It needs a screw on Holley fuel filter. picture is of service replacement sold by NPD for 10.00.The assemblyline version is a little shorter very rare and expensive when you find one
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby