Author Topic: Correct gauge feed harness and alternator to regulator harness, 1972  (Read 1050 times)

Offline c9zx

  • Full Member
  • ***
  • Posts: 179
The car is 1972 Mach 1 with AC, 351C-4V, build date is 03/16/72. I've purchased parts from two different sources, neither one correct. The gauge feed harness is short one jack and the alternator harness has the metal locating tab in the wrong location and the gauge of the Black with orange stripe wire is 10. It should be 8 gauge for a car with AC. Any help finding a source for correct parts is appreciated.

Thanks, Chuck
Thanks, Chuck

1969 G code Cougar Eliminator
1972 Q code Mach 1, auto, air, 2F05Q183426, 03/16/72
CSX 7031

Offline nham3407

  • Sr. Member
  • ****
  • Posts: 465
Re: Correct gauge feed harness and alternator to regulator harness, 1972
« Reply #1 on: September 30, 2010, 03:21:40 PM »
Chuck,

There is a seller on Ebay who goes by aboss429.  He has quite a few wiring harnesses that he advertises.  I have seen regular listings of the Alternator harness posted by him.  Try there.  A very knowledgable mustang friend of mine states aboss429 is the owner of Perogie Enterprises and that he knows his stuff pretty well on whether it is the correct part or not for your application.
67 GT S-Code, San Jose, 06/67
72 Mach 1, Dearborn, 01/72
68 Merc. Cyclone, Lorain, 12/67 (Red)
68 Merc. Cyclone, Lorain, 6/68 (White)