« previous next »
Pages: [1]   Go Down

Author Topic: 1968 GT 390 Heater Motor Verification (Correct Paint Finish)  (Read 993 times)

Offline bullitt68

  • Hero Member
  • *****
  • Posts: 2183
1968 GT 390 Heater Motor Verification (Correct Paint Finish)
« on: December 01, 2018, 10:00:41 PM »
Just curious if this is an original motor or not, The sticker/decal leads me to believe that it has been rebuilt. I just want to make sure before I remove it and paint it. Also what level of gloss should it be. I was planning to paint it semi gloss, close to what it is now. Also curious if it should be the same gloss as the firewall or slightly glossier.

Thanks
Logged
Mike
1968 Mustang Fastback GT 390 Raven Black, 4 speed
8R02S162374, San Jose, June 5, 1968

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: 1968 GT 390 Heater Motor Verification (Correct Paint Finish)
« Reply #1 on: December 02, 2018, 08:26:15 PM »
Does not appear to be a rebuilt unit but a replacement

Guess your building a non AC car (didn't include that detail) - if so then the shape/design is not like originals. Original exterior body was two piece both sort of shaped line cups joined together in the center and covered with a black masking looking seal around the seam

Surprise :(








« Last Edit: December 02, 2018, 08:41:59 PM by J_Speegle »
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline bullitt68

  • Hero Member
  • *****
  • Posts: 2183
Re: 1968 GT 390 Heater Motor Non AC Verification (Correct Paint Finish)
« Reply #2 on: December 02, 2018, 09:24:01 PM »
Quote from: J_Speegle on December 02, 2018, 08:26:15 PM
Does not appear to be a rebuilt unit but a replacement

Guess your building a non AC car (didn't include that detail) - if so then the shape/design is not like originals. Original exterior body was two piece both sort of shaped line cups joined together in the center and covered with a black masking looking seal around the seam

Surprise :(


Thanks Jeff. Are they easy to come by by chance
Logged
Mike
1968 Mustang Fastback GT 390 Raven Black, 4 speed
8R02S162374, San Jose, June 5, 1968

Offline RoyceP

  • Hero Member
  • *****
  • Posts: 1536
Re: 1968 GT 390 Heater Motor Verification (Correct Paint Finish)
« Reply #3 on: December 02, 2018, 10:17:15 PM »
Logged
1968 W code 427 Cougar XR-7 GTE Feb 23 Dearborn C6 / 3.50 open
1968 R code 428CJ Cougar XR-7 May 13 Dearborn C6 / 3.91 T - Lock

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: 1968 GT 390 Heater Motor Non AC Verification (Correct Paint Finish)
« Reply #4 on: December 02, 2018, 10:23:07 PM »
Quote from: bullitt68 on December 02, 2018, 09:24:01 PM
Thanks Jeff. Are they easy to come by by chance

Yes same design used for many years. Glossier black finish of the semi-gloss range for sure. For your time period of car don't believe I've ever seen any visible (once installed) engineering markings or dating so you don't have to worry that detail
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline bullitt68

  • Hero Member
  • *****
  • Posts: 2183
Re: 1968 GT 390 Heater Motor Non AC Verification (Correct Paint Finish)
« Reply #5 on: December 03, 2018, 12:48:59 AM »
Quote from: J_Speegle on December 02, 2018, 10:23:07 PM
Yes same design used for many years. Glossier black finish of the semi-gloss range for sure. For your time period of car don't believe I've ever seen any visible (once installed) engineering markings or dating so you don't have to worry that detail

Great so as long as it has the same design I should be fine. Obviously the design I have is not acceptable
Logged
Mike
1968 Mustang Fastback GT 390 Raven Black, 4 speed
8R02S162374, San Jose, June 5, 1968
Pages: [1]   Go Up
« previous next »